DNase I requires Ca2+ and Mg2+ for hydrolyzing double-stranded DNA. However, the number and the location of DNase I ion-binding sites remain unclear, as well as the role of these counter-ions. Using molecular dynamics simulations, we show that bovine pancreatic (bp) DNase I contains four ion-binding pockets. Two of them strongly bind Ca2+ while the other two sites coordinate Mg2+. These theoretical results are strongly supported by revisiting crystallographic structures that contain bpDNase I. One Ca2+ stabilizes the functional DNase I structure. The presence of Mg2+ in close vicinity to the catalytic pocket of bpDNase I reinforces the idea of a cation-assisted hydrolytic mechanism. Importantly, Poisson-Boltzmann-type electrostatic potential calculations demonstrate that the divalent cations collectively control the electrostatic fit between bpDNase I and DNA. These results improve our understanding of the essential role of cations in the biological function of bpDNase I. The high degree of conservation of the amino acids involved in the identified cation-binding sites across DNase I and DNase I-like proteins from various species suggests that our findings generally apply to all DNase I-DNA interactions.
DNase I requires Ca2+ and Mg2+ for hydrolyzing double-stranded DNA. Here, we show that bovine pancreatic (bp) DNase I contains four ion-binding pockets. Two of them, previously observed in the crystallographic structure of free bpDNase I, strongly bind Ca2+. The other two sites bind Mg2+ and are described in detail for the first time. One Ca2+ stabilizes the functional DNase I structure. The presence of Mg2+ in close vicinity to the catalytic pocket of bpDNase I reinforces the idea of a cation-assisted hydrolytic mechanism. Poisson-Boltzmann-type electrostatic potential calculations demonstrate that the divalent cations collectively control the electrostatic fit between bpDNase I and DNA. Thus, this work reveals the link between cation binding and the biological function of bpDNase I. The high degree of conservation of the amino acids involved in the identified cation-binding sites across DNase I and DNase I-like proteins from various species suggests that our findings generally apply to all DNase I-DNA interactions.
Citation: Guéroult M, Picot D, Abi-Ghanem J, Hartmann B, Baaden M (2010) How Cations Can Assist DNase I in DNA Binding and Hydrolysis. PLoS Comput Biol 6(11): e1001000. doi:10.1371/journal.pcbi.1001000
Editor: Michael Levitt, Stanford University, United States of America
Received: May 15, 2010; Accepted: October 15, 2010; Published: November 18, 2010
Copyright: © 2010 Guéroult et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: Marc Baaden thanks the French National Research Agency for funding (Grants ANR-06-PCVI-0025 and ANR-07-CIS7-003-01; http://www.agence-nationale-recherche.fr/). Marc Guéroult is funded by the CNRS (http://www.cnrs.fr). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
DNase I is a ubiquitous endonuclease that cleaves the phosphodiester backbone of the DNA double helix in the presence of divalent cations, introducing single-stranded nicks through hydrolysis of the P-O3′-bond and yielding 5′-phosphorylated fragments , . This enzyme plays a major role in digesting DNA for nutritional purposes ,  but also intervenes in several other biological processes, such as DNA degradation in apoptosis , DNA clearance from extracellular media  and actin depolymerization . In molecular biology, bovine pancreatic DNase I (bpDNase I), identified many years ago as a powerful footprinting agent  and is widely used today for in vitro, in situ and in vivo mapping of proteins onto genomes –. Finally, recombinant human DNase I has been developed clinically for treatment of pulmonary disease in patients with cystic fibrosis , . DNase I is also under consideration for a variety of other diseases , including pediatric lung diseases other than cystic fibrosis , systemic lupus erythematosus ,  and cancer .
DNase I, in particular bpDNase I, has been extensively studied. Its activity at physiological pH is at its highest in presence of both Ca2+ and Mg2+ –. DNase I activity is 100-fold lower in buffers that contain only one type of divalent cation compared to a Ca2+/Mg2+ reaction mixture . Without any divalent cations, DNase I activity is almost negligible.
In addition to its effect on enzymatic activity, the importance of Ca2+ for the structural integrity of DNase I has long been recognized. Calcium cations protect bpDNase I from proteolytic degradation  and its two disulfide bridges from reduction. Equilibrium dialysis and various spectroscopic studies have led to the conclusion that bpDNase I contains two strong and several weak cation-binding sites , . More precise information on the number and the location of divalent cations in bpDNase I can be extracted from the numerous high-resolution crystal structures available for this enzyme –. In particular, two calcium binding sites (site I and II) have been identified. Tightly bound Ca2+ ions at these sites are assumed to be an integral part of functional bpDNase I. This assumption is further supported by the dramatic decrease in specific activity observed in DNase I variants devoid of Ca2+-binding sites I or II , .
Ca2+ coordination in sites I and II involves amino acids belonging to loops L1 (Leu198 to Thr211, containing site I) and L2 (Tyr97 to Pro113, containing site II), which are structured by two disulfide bridges, Cys173-Cys209 and Cys101-Cys104, respectively . Ca2+ may further stabilize these loops and protect the disulfide bonds . However, in a site I defective variant, the Cys173-Cys209 bridge, close to site I, remains resistant to β-mercaptoethanol reduction , demonstrating that Ca2+ in site I is not necessary for protecting this bridge . On the other hand, Ca2+-containing buffers confer partial bpDNase I activity to a Cys173-Cys209 defective variant . These biochemical experiments, together with conclusions deduced from the measurement of Ca2+ dissociation constants and Ca2+-induced fluorescence changes , cannot be interpreted without assuming the existence of more than two cation binding sites in bpDNase I. This data suggests that additional sites may potentially be essential for the hydrolytic function of DNase I.
Little has been published on the number and location of Mg2+-binding sites. It has been proposed that Mg2+ is located near the catalytic pocket and contributes to hydrolysis . According to the 1DNK structure of a bpDNase I/DNA complex , and studies of specific chemically modified bpDNase I  and site-directed mutants , the catalytic site involves two histidines, His134 and His252 that coordinate the scissile phosphate. Similar catalytic pockets are common at the active sites in nucleases, which frequently require Mg2+ for their catalytic activity . In addition, mutations in putative divalent metal ion-coordinating residues close to the active site of human DNase I lead to inactive variants . These considerations, together with partial X-ray data ,  and theoretical investigations  have led to the postulate that one ,  or two ,  divalent cations may be positioned inside or very close to the catalytic pocket of DNase I. Their functional role may be to participate in DNA hydrolysis or to stabilize the DNA phosphate groups near the cleavage site.
Thus, despite extensive biochemical and structural characterization of bpDNase I, the number and the location of cation-binding sites in free bpDNase I have still not been resolved. The location of Ca2+-binding sites I and II has been firmly established through both X-ray structures and biochemical studies of DNase I variants. In contrast, Mg2+-binding sites remain much more hypothetical. In this study, molecular dynamics (MD) simulations in explicit solvent were carried out on bpDNase I, with variation in the compositions of metal ions. We identify four cation-binding sites and demonstrate that both Ca2+ and Mg2+ are crucial for optimizing the electrostatic fit between the enzyme and the negatively charged DNA. Two Mg2+-binding sites located within and very close to the active site of DNase I provide the first tangible support for a cation-assisted hydrolysis process. In sum, these findings establish a direct link between cation binding and the biological function of DNase I.
Number and location of possible cation-binding sites in bpDNase I extracted from high-resolution X-ray structures
The nine available high-resolution X-ray structures containing bpDNase I are listed in Table 1. All nine enzyme structures are very similar, with cross-root mean square deviations on Cα atoms (Cα-RMSD) lower than 0.5 Å. The structures were analyzed with respect to the number and the location of divalent cations bound to bpDNase I (Table 1). The structure of bpDNase I alone, 3DNI , comprises two Ca2+ binding sites, called sites I and II in the original publication (Figure 1). Site I was found in all of the six X-ray structures in which bpDNase I was complexed with various actin-binding motifs (1ATN, 2A40, 2A42, 2A3Z and 2A41 ; 2D1K ). Site II appeared in 3DNI and 1ATN. The frequent observation of these binding sites across free and bound bpDNase I structures confirms that Ca2+ tightly binds to sites I and II and should be considered as an integral part of functional bpDNase I . bpDNase I in complex with actin binds a third cation, its nature depending on the buffer. This third site, called site III in Figure 1 and throughout this paper, binds Ca2+ when the buffer contains Ca2+ but not Mg2+ (1ATN). However, site III preferentially coordinates Mg2+ in presence of both Ca2+ and Mg2+ (2A40, 2A42, 2A3Z, 2A41 and 2D1K). The bpDNase I/DNA complex structures (2DNJ  and 1DNK ) were crystallized without Ca2+ and Mg2+ to limit the possibility of DNA cleavage, eluding the question of cation localization. However, crystals of bpDNase I soaking in a solution of deoxythymidine-3′,5′-diphosphate in presence of Ca2+  and an unpublished structure of a bpDNaseI/DNA complex  indicate that a metal ion may be localized near the catalytic pocket.
Figure 1. bpDNase I ion binding sites.
Four sites (sites I to IVa,b) in bpDNase I are occupied by cations (red). Sites I, II and III are located in loops L1 and L2 (green), which contain disulfide bridges (yellow). Sites IVa and IVb surround the catalytic histidines (side-chains shown in gray, imidazole nitrogens in blue). Ion-binding pockets are within or near the region that interacts with DNA (orange, bottom). The highlighted DNA binding region was defined by the residues losing their solvent accessibility when complexed with DNA, as described in the Materials and Methods section.doi:10.1371/journal.pcbi.1001000.g001
Table 1. Ions bound to bpDNase I in high-resolution X-ray structures.doi:10.1371/journal.pcbi.1001000.t001
All of these observations are supported by the analysis of bound crystallographic water molecules (Table 1). Accordingly, bound water molecules are observed at sites I (2DNJ and 1DNK) and III (3DNI, 2DNJ and 1DNK). Interestingly, they are also present near the catalytic pockets in 3DNI, 2DNJ and 1DNK (Figure 1), areas which have previously been proposed as a possible fourth cation-binding site , . This hypothetical ion-binding site is called site IV herein.
Overall, these analyses show that at least three sites potentially bind divalent cations in bpDNase I. In addition to the well-known sites I and II, with high affinities for Ca2+, the detection of site III is particularly interesting since it seems to preferentially bind Mg2+. It remains to be verified whether this site can stabilize Mg2+ in actin-free bpDNase I. The existence of a fourth putative site located near the bpDNase I catalytic pocket, possibly occupied by Mg2+, is only supported by the presence of bound water molecules in three structures and thus must be explored de novo.
Structural drift in bpDNase I simulations
The confirmed or putative cation-binding sites identified above were further investigated using molecular dynamics simulations of bpDNase I carried out in the presence of various types of metal ions in explicit solvent. In all seven simulations, the starting positions of Na+ around the enzyme were determined using a Coulombic potential grid and, importantly, were not initially located in cation-binding sites. The characteristics of the seven simulations are summarized in Table 2. The Cα-RMSD values calculated between the free 3DNI bpDNase I and the simulated structures ranged from 1.0 (Sim3) to 1.7 (Sim 1) ±0.1 Å (Table 2), indicating that no major structural reorganizations occurred throughout the trajectories. The low standard deviations (0.1 Å, Table 2) attest to the stability of these simulations. In general, all simulated structures remained reasonably close to the 3DNI crystal structure.
Table 2. MD simulations performed on bpDNase I.doi:10.1371/journal.pcbi.1001000.t002
Number, location and coordination of cations in bpDNase I simulations
Sites I and II in bpDNase I, identical to their X-ray counter-parts, were very strong cation-binding pockets, always occupied by ions throughout the trajectories (Table 3). Na+ spontaneously occupied these sites in the absence of Ca2+ (Sim1). Ion coordination was optimal for both Na+ and Ca2+ (Table 4). Sites I and II were further strengthened by binding Ca2+ (Figure 2), given its maximal coordination number (CNmax) of 9 , higher than for Na+ (CNmax of 6 ). In addition, compared to Na+, the participation of Cys101 in the Cys101-Cys104 bridge reinforced the amino acid side-chain coordination of Ca2+ at site II (Tables 3 and 4). Both the amino-acid constitution and the tricapped trigonal prismatic geometry of sites I and II are identical to those of crystallographic structures.
Figure 2. Coordination spheres of Ca2+ and Mg2+ bound to bpDNase I.
Ca2+ (cyan) at sites I and II are involved in coordination spheres with tricapped trigonal prismatic geometry. The coordination spheres of Mg2+ (green) at sites III, IVa and IVb are octahedral. Cys173 interacts with a water molecule belonging to the coordination sphere of site III. The amino acids involved in the coordination spheres are listed in Table 2.doi:10.1371/journal.pcbi.1001000.g002
Table 3. bpDNase I binding site occupancy by cation species.doi:10.1371/journal.pcbi.1001000.t003
Table 4. Cation coordination number in bpDNase I binding sites.doi:10.1371/journal.pcbi.1001000.t004
Site III, close to site I (Figure 1), favored Mg2+ in the X-ray structures of bpDNase I in complex with actin (Table 1). Our simulations show that Na+ could spontaneously bind to site III in actin-free bpDNase I (Tables 2 and 3, Sim1, Sim2 and Sim4). Replacing Na+ with Mg2+ in Sim3 and Sim5–7 demonstrated that this site could also bind Mg2+ with an octahedral geometry, which has also been observed in the relevant crystallographic structures  (Tables 3 and 4, Figure 2). The coordination numbers were maximal for both Na+ and Mg2+ (CNmax of 6 ). Nevertheless, the maximal occupation time (100%) observed for Mg2+ indicates that this divalent cation was strongly bound to site III. Independently of the nature of the ion, only two bpDNase I residues were involved in the coordination sphere (Table 3, Figure 2), which was completed with water molecules. This feature, in line with crystal structures of bpDNase I/actin complexes , may imply that site III is weaker than sites I and II.
The existence of a fourth site (site IV) specific to Mg2+ has been suspected , ,  but never confirmed. A recent computational approach dedicated to the prediction of potential Ca2+ binding sites detected one such pocket near the DNase I active site . In the present study, site IV was discovered through the spontaneous binding of Na+ in Sim1 and Sim2. Site IV is a double-binding site, with two sub-sites, called IVa and IVb. The coordination sphere of site IVa involves the catalytic His252 residue. The ion at site IVb is very close (~5 Å on average) to the second catalytic residue, His134, which is implicated in cleavage activity. Sim3–7 show that both sub-sites were able to retain Mg2+ (Tables 3 and 4, Figure 2). According to its protein coordination (Table 4), Site IVa appeared stronger than sites III or IVb. More refined computational models would however be required to assess the relative strength of these binding sites with confidence. At first, sub-sites IVa and IVb appeared to be mutually exclusive, since they were never both spontaneously occupied simultaneously in Sim1-6. This was tested with trajectory Sim7 by constructing a starting point with two Mg2+ ions present at sites IVa and IVb. This simulation demonstrates that these sites could be simultaneously occupied by two divalent cations, keeping their intrinsic coordination characteristics.
In summary, four cation-binding sites were identified in free bpDNase I. The strong sites I, II and IVa, as well as the two additional sites III and IVb with fewer coordinating protein side-chains, were able to bind divalent cations.
Validation of the theoretical cation binding sites
The prediction of cation binding sites by molecular dynamics can potentially be biased by incomplete sampling of ion positions. In MD simulations with Ca2+ and Mg2+, these divalent cations were directly located at the sites where Na+ spontaneously binds. Conversely, Na+ ions were randomly distributed around DNase I, yet artifacts may have been caused by attraction from the closest negatively charged side-chains. In order to make sure that no such artifacts apply in the present case, we used two complementary approaches to systematically explore all possible cation pockets on the entire surface of DNase I. First, ion locations were interactively investigated with the “MyPal” approach that allows steering ions within DNase I electrostatic potential maps using a haptic device . Second, the CHED server for predicting metal binding sites in proteins  was used to systematically scan all DNase I crystal structures for cation pockets (see Table S1 in Supplemental Data). In both cases, the cation binding sites corresponded exactly to those highlighted by the MD simulations and, importantly, no additional pockets could be detected, further validating our findings.
The very high residence times of Mg2+ in MD simulations could be another issue. Indeed, this ion, due to its +2 charge and small radius, could be artificially trapped by DNase I. However, the fact that Na+ binds to sites III and IVa,b over the whole Sim 1–3 trajectories precludes the possibility of a specific bias towards Mg2+ in the present case.
The characteristics of theoretical sites I, II and III perfectly parallel those observed in the crystallographic structures containing DNase I, as mentioned in the previous section. Their existence is thus well attested. In order to obtain equally sound experimental evidence for the existence of site IV, we revisited the X-ray experimental electron density maps of the highest resolution structures 2A40 and 2A42. In both maps, significant densities are either unattributed (2A40) or attributed to a water molecule (2A42) at the location of site IVb. These perfectly match a divalent cation interacting with Glu39 and one (2A40) or five (2A42) water molecules (for details, Figure S1 and the comments in the Supplemental Data). These observations support earlier crystallographic considerations ,  suggesting that a metal ion might be bound near the catalytic site, in particular to Glu39. The existence of site IVb can thus be attested from the original X-ray data. No similar feature is found in the region of site IVa. However, several site-directed mutagenesis experiments on residues surrounding His134 and His252 demonstrated that single mutations of Glu39, Asp168 or Asp212 resulted in very low activities on DNA, for either bovine  or human  DNase I. The effects of these mutations add strength to the case for the existence of sub-site IVb (Glu39), and also indirectly add evidence for a site IVa, involving Asp168 and Asp212.
Structural effects of ions at sites I, II and III
Sites I and II are located in loops L1 (Leu195 to Tyr211) and L2 (Tyr97 to Pro113) respectively (Figure 1). The structural stability of L1, reflected by the low temperature factors in 3DNI  and the low root mean square fluctuation (RMSF) values (0.7±0.1 Å on average) in our simulations, was not affected by the nature of the bound ion (Figure 3). Conversely, the presence of ions affected L2, which was more flexible than L1 (Figure 3). Na+ in site II led to higher L2-RMSF values (1.3±0.1 Å on average) than Ca2+ (0.9±0.1 Å on average). The simulations further highlight that when Na+ was bound at site II, the Gly100-Cys104 region significantly deviated from the configuration observed with Ca2+ bound at this site (Figure 3). This suggests that Ca2+ at site II restricts L2 flexibility and stabilizes one of at least two possible conformations of L2.
Figure 3. L1 and L2 dynamics.
Ten snapshots (red) of L1 (left) and L2 (right) loop structures from Sim1 or Sim7 were superimposed on their counterparts in the 3DNI X-ray structure (green). Site I in L1 and site II in L2 bind either Na+ (dark blue, top panels) or Ca2+ (cyan, bottom panels). L2 contains one disulfide bridge (yellow).doi:10.1371/journal.pcbi.1001000.g003
Mg2+ at site III was coordinated to Asp172, protecting the Cys173-Cys209 bridge from reduction. Accordingly, one water molecule involved in the Mg2+ coordination sphere was also interacting with Cys173 (Figure 2). This water molecule, firmly bound by both Mg2+ and Cys173, did not exchange with the solvent and partially shielded the Cys173 sulphur atom, reducing its accessibility. This situation was specific to Mg2+, since the coordination sphere of Na+ at site III was formed by exchangeable water molecules that could not protect Cys173. Cation binding at the previously unknown site III provides a comprehensive interpretation of the resistance of the Cys173-Cys209 disulfide bridge to β-mercaptoethanol attack in a site I-defective bpDNase I variant .
Individually, cations stabilized the enzyme's structure, either directly (Ca2+ at site II) or indirectly (Mg2+ at sites III and IV).
Possible involvement of ions at sub-sites IVa and IVb in the catalytic mechanism
The proximity between the catalytic site and the double-binding site IV, involving two aspartates, one catalytic histidine and one glutamate, suggests that Mg2+ at sub-sites IVa and IVb may assist in the hydrolysis of the DNA phosphodiester bond. The approximate location of DNA with respect to Site IV is depicted in Figure 4. This type of catalytic mechanism involving two metal ions is now assumed for numerous hydrolases –. For instance, catalysis in type II restriction endonucleases may involve two Mg2+ ions coordinated by aspartate and glutamate , . In DNase I, the possible double occupancy of sub-sites IVa and IVb by two Mg2+ ions would specifically mean that the DNase I hydrolytic mechanism involves two metal ions, as previously proposed . In our simulations, Mg2+ at sub-site IVa was particularly buried (accessibility of the ion devoid of coordinating water molecules of 2.3±0.6 Å2) compared to cations at sites I, II and III (accessibility of 13.7±3.3 Å2, on average). This suggests that in presence of DNA, Mg2+ is unlikely to directly bind to the scissile DNA phosphate group. However, this ion coordinates His252 either directly or indirectly via a non-exchangeable water molecule and may thus stabilize this catalytic residue in a position that favors hydrolysis. In contrast, Mg2+ at sub-site IVb was bound close to His134 without involving any direct contact but was largely exposed (accessibility of 21.0±1.2 Å2). This particularity may allow Mg2+ at sub-site IVb to interact with DNA to correctly position the non-esterified oxygen of the phosphate group, as previously postulated .
Figure 4. Detailed view of Site IV.
A close-up view of the double magnesium binding site IVa and IVb, where DNA from the 1DNK complex was modeled in by superimposition of the protein chains from our simulation and from the crystal structure. Acidic side-chains are shown in red, histidines in blue, magnesium in green. The size of the cations is indicated by a transparent van der Waals sphere to assess their possible contact with DNA. The DNA surface is represented colored by underlying atom type, red for oxygen, orange for phosphorus, blue for nitrogen, white for carbon.doi:10.1371/journal.pcbi.1001000.g004
At the present stage, our study cannot reveal further details of the bpDNase I hydrolysis process. However, the discovery of site IV strengthens the hypothesis that Mg2+ ions are directly implicated in the enzymatic function of DNase I.
Collective effects of ions on the electrostatics of the bpDNase I/DNA interface
In addition to these diverse roles, we suspected that ions may interfere with the bpDNase I/DNA interaction. Any favorable interaction between two charged macromolecules requires an electrostatic fit between them. Nucleic acid molecules are negatively charged, mainly owing to their phosphate groups. Their interaction with proteins thus requires positively charged protein surfaces –. Regarding the DNase I enzyme, hyperactive variants of the human protein have been obtained by introducing additional positively charged amino acids at the DNA binding interface . An investigation of the effect of ions on the electrostatic properties of the bpDNase I surface is all the more relevant since the bpDNase I ion binding pockets are either in (site IV) or very close to (sites I, II and III) the region at the interface with the DNA substrate (Figure 1).
Poisson-Boltzmann electrostatic potential maps were calculated for bpDNase I structures extracted from simulations Sim3–7, focusing on the region where DNA interacts with the enzyme. According to the 3DNI, 2DNJ and 1DNK structures, this region involves 24 amino acids (listed in Materials and Methods). In addition to the enzyme without any bound ions, we also considered bpDNase I with various combinations of bound ions, with sites I and II always coordinating Ca2+.
The electrostatic potential of the interface was extremely sensitive to the number of charges contributed by the ions (Figures 5 and 6). Despite a moderate net charge of -1 (against -9 for the whole protein), the bpDNase I interface displayed a very negative electrostatic potential in the absence of counter-ions, thus inhibiting DNA binding. Adding ions to the identified binding sites progressively lowered the negative surface charge. The contribution of the deeply buried Mg2+ at sub-site IVa was lower than for the other bound ions (Figure 5, Sim5). The presence of eight positive charges was required to reverse the enzyme's surface charge to positive values. Since both sites I and II are occupied by Ca2+, at least two additional divalent cations are required to enable DNA binding.
Figure 5. Effect of bound ions on the electrostatic potential of the bpDNase I region that interacts with DNA.
Electrostatic potentials (Ep, in kT/e units) of the bpDNase I region involved in the interaction with DNA were calculated on ten snapshots extracted from Sim3 (black), Sim4 (pink), Sim5 (green), Sim6 (blue) and Sim7 (red). Ep values are ordered as a function of the number of charges carried by the ions at sites I, II, III or IVa,b. Error bars represent standard deviations.doi:10.1371/journal.pcbi.1001000.g005
Figure 6. Effect of bound ions on the electrostatic potential surface of the bpDNase I region that interacts with DNA.
Electrostatic potential maps colored from -5 kT/e in red to +5 kT/e in blue for the bpDNase I region involved in the interaction with DNA. The top panel shows the map obtained in the absence of any bound cations, the central panel shows the map for sites I & II occupied by Ca2+ (cyan), and III, IVa and IVb by Mg2+ (green). The bottom panel indicates the location of DNA (magenta) at its binding site on DNase I with respect to the ion binding sites.doi:10.1371/journal.pcbi.1001000.g006
The existence of crystallographic DNA/DNase I complexes (2DNJ  and 1DNK ) seems in contradiction with this result. Indeed, these two complexes were crystallized in a medium devoid of divalent cations to try to prevent DNA hydrolysis. Yet, the presence of monovalent ions, very difficult to detect by X-ray crystallography, cannot be ruled out. Such monovalent cations could limit the electrostatic repulsion between the two partners and may also explain why the DNA is cleaved in the 2DNJ structure. In addition, water molecules may contribute to electrostatic screening.
Poisson-Boltzmann calculations show that ions bound to DNase I can collectively influence the electrostatic potential of the bpDNase I region involved in the DNA interface, and thus drive the electrostatic fit between the enzyme and the DNA substrate.
Conservation of the residues involved in bpDNase I ion binding sites
The importance of individual amino acids in bpDNase I cation-binding sites can be further assessed by comparing the sequences from DNase I and DNase I-like proteins of various species (from 30 for DNase I to 11 for DNase I-like 2). DNase I-like proteins include three variants. The sequences and their percentages of identity with bpDNase are listed in Table S2, Table S3, Table S4, Table S5 (in Supplemental Data). Using bpDNase I as a reference, the DNase I sequence identities ranged from 43 to 93%, except for one sequence that exhibited a very low identity of 20%. DNase I-like proteins shared from 22 to 58% sequence identity with bpDNase I.
The conservation of the bpDNase I cation-binding sites is shown in Table 5 and illustrated for the human DNase I in Figure 7. Sites II, IVa and IVb are almost perfectly conserved, apart from Cys101 in site II. Asp201 and Thr203 in site I are also well conserved. The three other site I residues show more substitutions, but conserve their polarity. For instance, the bpDNase I motif Thr207-Asn208 is often inverted to Asn207-Thr208. Site III conservation is less straightforward. The Asp198 residue is common to the different DNase I proteins and to various species, but Asp172 is replaced by Gly in DNase I and DNase I-like 3.
Figure 7. Conservation of cation binding sites in bpDNase I, human DNase I and DNase I-like proteins.
Sequences of the human DNase I and DNase I-like 1, 2 and 3 proteins were aligned with the bovine pancreatic DNase I sequence. The alignment highlights the bpDNase I cation-binding sites I, II, III, IVa and IVb. Most of the corresponding amino acids belonging to human enzymes are either identical or similar to those of bpDNase I.doi:10.1371/journal.pcbi.1001000.g007
Table 5. Conservation of the residues involved in bpDNase I ion binding sites across four DNase I families in various species.doi:10.1371/journal.pcbi.1001000.t005
Overall, the cation-binding sites in bpDNase I are as well conserved as the residues involved in DNase I/DNA contacts , , especially sites I, II and IVa and b. This strongly supports the critical role of these sites for the biological function of DNase I.
The aim of this work was to investigate the ability of bpDNase I to bind divalent cations, Ca2+ and Mg2+, and to elucidate their possible roles in bpDNase I function.
In several simulations, we used monovalent sodium ions as a reference state, as they may occupy any of the potential binding sites. It should be noted that NaCl effectively inhibits DNase I activity , , which can be reversed by addition of divalent ions . This effect is related to the ionic strength of the system as well as to the positive charges present on the protein , which is fully compatible with the trends observed in our electrostatic surface calculations. The experimental findings underline the importance of electrostatics and show a particularly interesting mechanistic effect of engineering positively charged residues into the enzyme.
Molecular dynamics simulations reveal that four sites are able to bind Ca2+ (sites I and II) or Mg2+ (sites III and IVa and b). The existence of sites I, II and III is demonstrated by the X-ray structures of free (sites I and II) and actin-bound bpDNase I (sites I, II and III). Reexamination of the 2A40 and 2A42 electron density maps validates sub-site IVb. Sub-site IVa is indirectly but firmly confirmed by site-directed mutations . The occupation time, the coordination characteristics, and the conservation of amino-acids involved in these sites show that sites I, II and IV correspond to strong bpDNase I cation-binding pockets, while site III is weaker.
At site II, Ca2+ acts on the folding of the L2 loop and reduces its mobility. At site III, Mg2+ is located very close to the Cys173-Cys209 bridge and protects this essential structural element from reduction. Site IV corresponds to two sub-sites, IVa and IVb, with an ion either coordinating (sub-site IVa) or close (sub-site IVb) to the two histidine residues involved in the DNA cleavage process. The discovery of site IV is a first step towards a comprehensive understanding of the bpDNase I enzymatic mechanism. In addition to these local functions, bound ions collectively modify the electrostatic potential of the bpDNase I region implicated in DNA binding. By introducing positive charges, they compensate for the intrinsic repulsion between DNase I and DNA, both negatively charged. A similar effect may have been achieved by engineering Human DNase I mutants, introducing additional positive charges at the DNA binding domain .
Beyond the current investigation of Mg2+ and Ca2+ binding, this study also opens the prospect to address the effects of other divalent metal ions, for instance Mn2+, able to enhance DNase I activity , . However, more refined computational methods may be required for such investigations in order to properly account for the differences between such cations.
Our results are consistent with a recent study highlighting how the prediction of ion binding sites may improve our understanding of structure-based protein functions . The characterization of the bpDNase I cation-binding sites reveals how these bound ions can contribute to bpDNase I function at various levels. The remarkable conservation of these binding sites across diverse proteins belonging to the DNase I family and across different species suggests that our findings are significant for DNase I proteins in general. Building better models of DNase I structure and action are essential, given the role of DNase I in numerous fundamental biological processes and its wide-spread use in biochemical and medical contexts.
Materials and Methods
Molecular dynamics simulations
A summary of all MD simulations is given in Table 2. Simulations were performed using the AMBER 8 program  with the Parm99 force field (ff99 ). DNase I was neutralized with various cations (Na+; Na+ and Ca2+; Na+, Ca2+ and Mg2+) and hydrated with TIP3P water molecules using a truncated octahedron as simulation box. The box size is 15 Å in all directions. Simulations were performed at constant temperature (300 K) and pressure (1 bar) using a Berendsen coupling algorithm . The integration time–step was 2 fs and covalent bonds involving hydrogen were constrained using SHAKE . Long-range electrostatic interactions were treated using the particle mesh Ewald (PME) approach  with a 9 Å direct space cut-off. The non-bonded pair list was updated every 25 steps and the center of mass motion removed every 10 ps.
Water molecules and cations were energy-minimized and equilibrated in the NVT ensemble at 100 K for 100 ps, with the protein constrained. The entire system (bpDNase I, water molecules and ions) was then heated from 100 to 300 K in 10 ps by 5 K increments with harmonic restraints of 5.0 kcal mol−1 Å−2 on the solute atoms. The simulations were continued in the NPT ensemble, without a noticeable change in volume. Subsequently, production runs lasting 25 ns were carried out.
Starting points for the simulations
The same initial configuration was used for Sim1 and Sim2. This starting point was constructed from the crystal structure of the bpDNase I enzyme at 2 Å resolution (PDB code 3DNI ). In 3DNI, the atomic positions of Glu99 and Ser100 belonging to the flexible L2 loop could not be resolved. Using AMBER, we built and relaxed a complete protein including these two residues. Sim3–7 starting structures were derived from the structure of Sim2 at 20 ns.
A Coulombic potential grid was used to determine the initial positions of Na+ ions. Ca2+ locations in Sim3–7 were those observed in 3DNI. In addition to these two 3DNI Ca2+ sites, two strong Na+ binding sites were observed in Sim1 and Sim2. These bound Na+ ions were replaced by Mg2+ in Sim3–7.
In all simulations, the two histidines involved in the catalytic pocket, His134 and His252, were in their neutral form to test a potential cation-binding site under favorable conditions. This was consistent with calculations carried out on 3DNI devoid of cations with the WhatIf program  that yielded pKa estimates of ~7.3 for both His134 and His252.
Radial distribution functions (RDF)
All radial distribution functions were computed using the g_rdf analysis module of the Gromacs software suite. RDF analysis was used to determine ion–oxygen distributions and coordination numbers for Na+, Ca2+ and Mg2+. These coordination numbers were calculated for all ions bound to bpDNase I in each trajectory. Fixed distances of 3.2 Å for Na+ and Ca2+ and 2.9 Å for Mg2+ were used to define the outer limit of the first solvation shell , .
Electrostatic potential calculations
Electrostatic potential maps were calculated with the Adaptive Poisson-Boltzmann Solver (APBS)  on 10 snapshots extracted from the last 10 ns of the trajectories, using APBS default parameters (physiological salt concentration of 150 mM, temperature of 298.15 K, solvent dielectric of 78.4, and solute dielectric of 2). Van der Waals radii and partial charges of both the protein and the Ca2+, Na+ and Mg2+ ions were those of the AMBER ff99 force field. Solute charges were distributed onto grid points using a cubic B-spline discretization. The molecular surface was defined by the interface between a 1.4 Å solvent probe, corresponding to the radius of a water molecule, and the solute van der Waals radii.
These calculations focused on the bpDNase I region corresponding to the bpDNase I/DNA interface. The amino acids belonging to this interface were determined by comparing the amino acid accessibilities in free (3DNI ) and bound DNase I (2DNJ  and 1DNK ) with Naccess . The interface includes a total of 24 residues, Arg9, Thr10, Gly12, Glu13, Thr14, Glu39, Arg41, Asp42, Ser43, Asn74, Ser75, Tyr76, Arg111, Ala136, Pro137, Asp168, Asn170, Tyr175, Thr203, Thr205, Thr207, Tyr211 and the two catalytic histidines, His134 and His252.
Various combinations of ions were tested, from naked (no ion) to maximally charged DNase I, i.e. with a total of ten positive charges. Naked or partially charged DNase I structures were obtained by removing ions from the snapshots. In the APBS calculations including ions, sites I and II always coordinated Ca2+. Despite the well known difficulty of obtaining accurate potentials with explicit ions , these calculations were consistent across the trajectories (see Figure 5 in the “Results” section). We conclude that these results provide a good estimate of the effect of ions on the DNase I electrostatic potential.
The first 500 sequences homologous to bpDNase I were extracted from the Basic Local Alignment Search Tool (BLAST) . They were then sorted into four families, DNase I, DNase I-like 1, 2 and 3, each set containing non-redundant sequences. The alignment with the bpDNase I sequence was carried out using ClustalW2 .
Analysis and graphics
Secondary structure elements were identified using the STRIDE method by Heinig and Frishman . Accessibilities were calculated using Naccess  and a radius probe of 1.4 Å. Graphical representations were prepared with VMD . Standard conformational analysis was carried out using tools from the GROMACS package, the Ptraj module of AMBER and the PTools library . Statistical and data analyses were performed using the R statistical software package .
Reinterpretation of the 2A40 and 2A42 crystal structures. Figure S1 is related to Table 1. Identified divalent metal ion binding sites in the 2A40 (a) and 2A42 (b) structures. In both cases the ion (green) is coordinated by Glu39 and 1 to 5 water molecules (red). Densities are contoured at 4σ (black). In (b), we also contoured at 3σ (blue) as this threshold was used to assign the water molecule at 2.5 Å distance.
(0.97 MB DOC)
Ion binding sites predicted via the CHED server. This Table is related to Figure 1. The CHED server, available on line (http://ligin.weizmann.ac.il/~lpgerzon/mbs4), refers to Babor, M., Gerzon, S., Raveh, B., Sobolev, V. and Edelman, M. (2008) Prediction of transition metal-binding sites from apo protein structures. Proteins, 70, 208-217. N.O. stands for not observed. X marks the binding sites that were identified. a Both subsites IVa and IVb are identified as a single binding site.
(0.04 MB DOC)
Thirty non-redundant DNase I sequences from various species. This Table is related to Table 5. The sequences homologous to bpDNase I correspond to precursors or mature proteins attributed to the DNase I family. The protein lengths are those of the original selected sequences.
(0.05 MB DOC)
Sixteen non-redundant DNase I-like 1 sequences from various species. This Table is related to Table 5. The sequences homologous to bpDNase I correspond to precursors or mature proteins attributed to the DNase I-like I family. The protein lengths are those of the original selected sequences.
(0.04 MB DOC)
Eleven non-redundant DNase I-like 2 sequences from various species. This Table is related to Table 5. The sequences homologous to bpDNase I correspond to precursors or mature proteins attributed to the DNase I-like 2 family. The protein lengths are those of the original selected sequences.
(0.03 MB DOC)
Seventeen non-redundant DNase I-like 3 sequences from various species. This Table is related to Table 5. The sequences homologous to bpDNase I correspond to precursors or mature proteins attributed to the DNase I-like 3 family. The protein lengths are those of the original selected sequences.
(0.04 MB DOC)
The authors wish to address their acknowledgments to Dr. Olivier Delalande and Dr. Nicolas Férey for technical assistance and helpful discussions, and to Daniel Parton for proof-reading the manuscript.
Conceived and designed the experiments: BH MB. Performed the experiments: MG JAG. Analyzed the data: MG DP BH MB. Contributed reagents/materials/analysis tools: MG DP BH MB. Wrote the paper: MG BH MB. Crystallographic expertise and analysis of the data: DP.
- 1. Laskowski M (1971) Deoxyribonuclease I. In: Inc AP, editor. The Enzymes. New York: pp. 289–311. 3rd edition ed.
- 2. Moore S (1981) Pancreatic DNase. In: Inc AP, editor. The Enzymes. New York: pp. 281–296.
- 3. Counis MF, Torriglia A (2000) DNases and apoptosis. Biochem Cell Biol 78: 405–414.
- 4. Napirei M, Karsunky H, Zevnik B, Stephan H, Mannherz HG, et al. (2000) Features of systemic lupus erythematosus in Dnase1-deficient mice. Nat Genet 25: 177–181.
- 5. dos Remedios CG, Chhabra D, Kekic M, Dedova IV, Tsubakihara M, et al. (2003) Actin binding proteins: regulation of cytoskeletal microfilaments. Physiol Rev 83: 433–473.
- 6. Galas DJ, Schmitz A (1978) DNAse footprinting: a simple method for the detection of protein-DNA binding specificity. Nucleic Acids Res 5: 3157–3170.
- 7. Boyle AP, Davis S, Shulha HP, Meltzer P, Margulies EH, et al. (2008) High-resolution mapping and characterization of open chromatin across the genome. Cell 132: 311–322.
- 8. Hesselberth JR, Chen X, Zhang Z, Sabo PJ, Sandstrom R, et al. (2009) Global mapping of protein-DNA interactions in vivo by digital genomic footprinting. Nat Methods 6: 283–289.
- 9. Radwan A, Younis A, Luykx P, Khuri S (2008) Prediction and analysis of nucleosome exclusion regions in the human genome. BMC Genomics 9: 186.
- 10. Zhang Y, Shin H, Song JS, Lei Y, Liu XS (2008) Identifying positioned nucleosomes with epigenetic marks in human from ChIP-Seq. BMC Genomics 9: 537.
- 11. Ulmer JS, Herzka A, Toy KJ, Baker DL, Dodge AH, et al. (1996) Engineering actin-resistant human DNase I for treatment of cystic fibrosis. Proc Natl Acad Sci U S A 93: 8225–8229.
- 12. Lazarus RA, Wagener JS (2007) Recombinant Human Deoxyribonuclease I. In: Inc IHU, editor. Pharmaceutical Biotechnology. New York: pp. 387–398. 3 rd edition ed.
- 13. Boogaard R, de Jongste JC, Merkus PJ (2007) Pharmacotherapy of impaired mucociliary clearance in non-CF pediatric lung disease. A review of the literature. Pediatr Pulmonol 42: 989–1001.
- 14. Martinez Valle F, Balada E, Ordi-Ros J, Vilardell-Tarres M (2008) DNase 1 and systemic lupus erythematosus. Autoimmun Rev 7: 359–363.
- 15. Gaipl US, Kuhn A, Sheriff A, Munoz LE, Franz S, et al. (2006) Clearance of apoptotic cells in human SLE. Curr Dir Autoimmun 9: 173–187.
- 16. Taper HS (2008) Altered deoxyribonuclease activity in cancer cells and its role in non toxic adjuvant cancer therapy with mixed vitamins C and K3. Anticancer Res 28: 2727–2732.
- 17. Melgar E, Goldthwait DA (1968) Deoxyribonucleic acid nucleases. II.The effects of metals on the mechanism of action of deoxyribonuclease I. J Biol Chem 243: 4409–4416.
- 18. Pan CQ, Ulmer JS, Herzka A, Lazarus RA (1998) Mutational analysis of human DNase I at the DNA binding interface: implications for DNA recognition, catalysis, and metal ion dependence. Protein Sci 7: 628–636.
- 19. Price PA (1972) Characterization of Ca ++ and Mg ++ binding to bovine pancreatic deoxyribonuclease A. J Biol Chem 247: 2895–2899.
- 20. Price PA, Liu TY, Stein WH, Moore S (1969) Properties of chromatographically purified bovine pancreatic deoxyribonuclease. J Biol Chem 244: 917–923.
- 21. Poulos TL, Price PA (1972) Some effects of calcium ions on the structure of bovine pancreatic deoxyribonuclease A. J Biol Chem 247: 2900–2904.
- 22. Tullis R, Price PA (1974) The effect of calcium and magnesium on the ultraviolet spectrum of bovine pancreatic deoxyribonuclease A. J Biol Chem 249: 5033–5037.
- 23. Kabsch W, Mannherz HG, Suck D, Pai EF, Holmes KC (1990) Atomic structure of the actin:DNase I complex. Nature 347: 37–44.
- 24. Oefner C, Suck D (1986) Crystallographic refinement and structure of DNase I at 2 A resolution. J Mol Biol 192: 605–632.
- 25. Chereau D, Kerff F, Graceffa P, Grabarek Z, Langsetmo K, et al. (2005) Actin-bound structures of Wiskott-Aldrich syndrome protein (WASP)-homology domain 2 and the implications for filament assembly. Proc Natl Acad Sci U S A 102: 16644–16649.
- 26. Chen CY, Lu SC, Liao TH (2002) The distinctive functions of the two structural calcium atoms in bovine pancreatic deoxyribonuclease. Protein Sci 11: 659–668.
- 27. Pan CQ, Lazarus RA (1999) Ca2+-dependent activity of human DNase I and its hyperactive variants. Protein Sci 8: 1780–1788.
- 28. Price PA, Stein WH, Moore S (1969) Effect of divalent cations on the reduction and re-formation of the disulfide bonds of deoxyribonuclease. J Biol Chem 244: 929–932.
- 29. Chen WJ, Lee IS, Chen CY, Liao TH (2004) Biological functions of the disulfides in bovine pancreatic deoxyribonuclease. Protein Sci 13: 875–883.
- 30. Tullis RH, Dill KA, Price PA (1981) Fluorescence and kinetic studies on the divalent metal ion induced conformational changes in DNase A. J Biol Chem 256: 5656–5661.
- 31. Jones SJ, Worrall AF, Connolly BA (1996) Site-directed mutagenesis of the catalytic residues of bovine pancreatic deoxyribonuclease I. J Mol Biol 264: 1154–1163.
- 32. Weston SA, Lahm A, Suck D (1992) X-ray structure of the DNase I-d(GGTATACC)2 complex at 2.3 A resolution. J Mol Biol 226: 1237–1256.
- 33. Chen WJ, Lai PJ, Lai YS, Huang PT, Lin CC, et al. (2007) Probing the catalytic mechanism of bovine pancreatic deoxyribonuclease I by chemical rescue. Biochem Biophys Res Commun 352: 689–696.
- 34. Dupureur CM (2008) Roles of metal ions in nucleases. Curr Opin Chem Biol 12: 250–255.
- 35. Lahm A, Suck D (1991) DNase I-induced DNA conformation. 2 A structure of a DNase I-octamer complex. J Mol Biol 222: 645–667.
- 36. Glazer DS, Radmer RJ, Altman RB (2009) Improving structure-based function prediction using molecular dynamics. Structure 17: 919–929.
- 37. Lee SH, Kerff F, Chereau D, Ferron F, Klug A, et al. (2007) Structural basis for the actin-binding function of missing-in-metastasis. Structure 15: 145–155.
- 38. Suck D, Oefner C (1986) Structure of DNase I at 2.0 A resolution suggests a mechanism for binding to and cutting DNA. Nature 321: 620–625.
- 39. Bounds DG (1985) A molecular dynamics study of the structure of water around the ions Li+, Na+, K+, Ca++, Ni+ and Cl-. Molecular Physics 54: 1335–1355.
- 40. Jiao D, King C, Grossfield A, Darden TA, Ren P (2006) Simulation of Ca2+ and Mg2+ solvation using polarizable atomic multipole potential. J Phys Chem B 110: 18553–18559.
- 41. Delalande O, Ferey N, Laurent B, Gueroult M, Hartmann B, et al. (2010) Multi-resolution approach for interactively locating functionally linked ion binding sites by steering small molecules into electrostatic potential maps using a haptic device. Pac Symp Biocomput. pp. 205–215.
- 42. Babor M, Gerzon S, Raveh B, Sobolev V, Edelman M (2008) Prediction of transition metal-binding sites from apo protein structures. Proteins 70: 208–217.
- 43. Pingoud A, Fuxreiter M, Pingoud V, Wende W (2005) Type II restriction endonucleases: structure and mechanism. Cell Mol Life Sci 62: 685–707.
- 44. Sigel RK, Pyle AM (2007) Alternative roles for metal ions in enzyme catalysis and the implications for ribozyme chemistry. Chem Rev 107: 97–113.
- 45. Yang W, Lee JY, Nowotny M (2006) Making and breaking nucleic acids: two-Mg2+-ion catalysis and substrate specificity. Mol Cell 22: 5–13.
- 46. Pingoud V, Wende W, Friedhoff P, Reuter M, Alves J, et al. (2009) On the divalent metal ion dependence of DNA cleavage by restriction endonucleases of the EcoRI family. J Mol Biol 393: 140–160.
- 47. Arcesi L, La Penna G, Perico A (2007) Generalized electrostatic model of the wrapping of DNA around oppositely charged proteins. Biopolymers 86: 127–135.
- 48. Cherstvy AG (2009) Positively charged residues in DNA-binding domains of structural proteins follow sequence-specific positions of DNA phosphate groups. J Phys Chem B 113: 4242–4247.
- 49. Nadassy K, Wodak SJ, Janin J (1999) Structural features of protein-nucleic acid recognition sites. Biochemistry 38: 1999–2017.
- 50. Pan CQ, Lazarus RA (1998) Hyperactivity of human DNase I variants. Dependence on the number of positively charged residues and concentration, length, and environment of DNA. J Biol Chem 273: 11701–11708.
- 51. Evans SJ, Shipstone EJ, Maughan WN, Connolly BA (1999) Site-directed mutagenesis of phosphate-contacting amino acids of bovine pancreatic deoxyribonuclease I. Biochemistry 38: 3902–3909.
- 52. Kunitz M (1950) Crystalline desoxyribonuclease; digestion of thymus nucleic acid; the kinetics of the reaction. J Gen Physiol 33: 363–377.
- 53. Shack J, Bynum BS (1964) Interdependence of Variables in the Activation of Deoxyribonuclease I. J Biol Chem 239: 3843–3848.
- 54. Pan CQ, Lazarus RA (1997) Engineering hyperactive variants of human deoxyribonuclease I by altering its functional mechanism. Biochemistry 36: 6624–6632.
- 55. Case DA, Cheatham TE 3rd, Darden T, Gohlke H, Luo R, et al. (2005) The Amber biomolecular simulation programs. J Comput Chem 26: 1668–1688.
- 56. Wang JC, Cieplak P, Kollman P (2000) How well does a Restrained Electrostatic Potential (RESP) Model perform in Calculation conformation Energies of Organic and Biological Molecules. J Comput Chem. pp. 1049–1074.
- 57. Berendsen HJC, Postma WF, Van Gunsteren A, DiNola A, Haak JR (1984) Molecular dynamics with coupling to an external bath. J Chem Phys 81: 3684–3690.
- 58. Van Gunsteren WF, Berendsen HJC (1977) Algorithms for macromolecular dynamics and constraint dynamics. Mol Phys 34: 1311–1327.
- 59. Darden T, York D, Pedersen L (1993) Particle mesh Ewald: an N.log(N) method for Ewald sums in large systems. J Chem Phys 98: 10089–10092.
- 60. Vriend G (1990) WHAT IF: a molecular modeling and drug design program. J Mol Graph 8: 52–56,29.
- 61. Grossfield A (2005) Dependence of ion hydration on the sign of the ion's charge. J Chem Phys 122: 024506.
- 62. Baker NA, Sept D, Joseph S, Holst MJ, McCammon JA (2001) Electrostatics of nanosystems: application to microtubules and the ribosome. Proc Natl Acad Sci U S A 98: 10037–10041.
- 63. Hubbard SJ, Thornton JM (1993) ‘NACCESS’, Computer Program. Department of Biochemistry and Molecular Biology, University College London.
- 64. Prabhu NV, Panda M, Yang Q, Sharp KA (2008) Explicit ion, implicit water solvation for molecular dynamics of nucleic acids and highly charged molecules. J Comput Chem 29: 1113–1130.
- 65. Altschul SF, Madden TL, Schaffer AA, Zhang J, Zhang Z, et al. (1997) Gapped BLAST and PSI-BLAST: a new generation of protein database search programs. Nucleic Acids Res 25: 3389–3402.
- 66. Thompson JD, Higgins DG, Gibson TJ (1994) CLUSTAL W: improving the sensitivity of progressive multiple sequence alignment through sequence weighting, position-specific gap penalties and weight matrix choice. Nucleic Acids Res 22: 4673–4680.
- 67. Heinig M, Frishman D (2004) STRIDE: a web server for secondary structure assignment from known atomic coordinates of proteins. Nucleic Acids Res 32: W500–502.
- 68. Humphrey W, Dalke A, Schulten K (1996) VMD: visual molecular dynamics. J Mol Graph 14: 33–38, 27–38.
- 69. Saladin A, Fiorucci S, Poulain P, Prevost C, Zacharias M (2009) PTools: an opensource molecular docking library. BMC Struct Biol 9: 27.
- 70. Team RDC (2006) A language and environment for statistical computing. Available at R Foundation for Statistical Computing, http://www.R-project.org.